 |
|
 |
 |
| |
|
|
| |
|
HTBM-3000
stretch blow moulding machine is an automatic two-stages blow-molding equipment. It is suitable for various kinds of plastic bottle in all shapes, which be made of different materials such as PET, PC, PP and PE. It can be widely used to produce the carbonated bottle, mineral bottle, oil bottle, pesticide bottle, cosmetics, wide-mouth bottle and hot fill bottle etc, Since applied to produce for 5 years, it has been sold to 100 countries.
◎ Advanced computer-controlled system with stable performance.
◎ From feeding perform to finish blowing if fully automatic mass production and labor could be tremendously saved. |
◎ Adopts infrared heater with strong penetration force and uses the perform suspension auto-revolving method with fast and reliable results.
◎ Adjustable light and reflecting plate in heating zone for different structured performs.
◎ Equipped with built in safety lock for each mechanical action in case when a certain procedure comes in trouble, the program can automatically toggle to the safety status.
◎ Cylinder-driven action, automatic temperature adjustment, with low noise, zero pollution and other benefits as a result of not using oil pumps.
◎ Strong clamping force due to using mechanical-double-arm mould clamping.
◎ Fully automatic process with low investment, high efficiency, quick and safe operation, easy for trouble-shooting and maintenance.
|
|
 |
|
TYPE |
ITEM |
UNIT |
TECHNICAL DATA |
|
2-CAVITY |
4-CAVITY |
|
CONTAINER |
Product materical |
|
PET/PP/PE/PC |
PET/PP/PE/PC |
|
Container volume |
L |
0.05-2.5 3-6(1-cavity) |
0.05-2.5 3-6(2-cavity) |
|
Theoretical output |
Pcs/hr |
6L:450/2L:1200 0.5L:1500/0.1L/1800 |
6L:750/2L:1900 0.5L:2500/0.1L/2800 |
|
Preform length |
mm |
50-220 |
50-220 |
|
Max.length of bottle |
mm |
350 |
350 |
|
Preform inner diameter |
mm |
φ15-60 φ60-180
(1-cavity) |
φ15-60 φ60-180
(2-cavity) |
|
Bottle diameter |
mm |
φ35-110 φ110-230
(1-cavity) |
φ35-110 φ110-230
(2-cavity) |
|
MOULDING |
Max.mould plate dimension(L×W) |
mm |
370×550 |
420×500 |
|
Max.mould thickness |
mm |
180-250 |
180-250 |
|
Clamping force |
KN |
150 |
280 |
|
Mould opening stroke(Adjustable) |
mm |
80-250 |
80-250 |
|
AIR
COMPRESSOR |
High pressure compressor |
M3/Mpa KW |
≥0.60/3.0×1set 11KW |
≥0.60/3.0×2set 11KW |
|
Low pressure compressor |
M3/Mpa KW |
≥1.25/1.0 7.5KW |
≥1.63/1.0 7.5KW |
|
DRYER |
Air dryer |
M3/Mpa KW |
1.0/3.0 |
1.0/3.0 |
|
MAIN MACHINE
ELECTRICITY |
Power |
KW |
15.5 |
25.5 |
|
Voltage/Frequency |
V/HZ |
380-220/50-60(3-phase) |
380-220/50-60 (3-phase) |
|
MACHINE SIZE AND WEIGHT |
Main machine
(L×W×H) |
M |
2.64×1.57×2.00 |
3.58×1.73×1.92 |
|
Main machine weight |
T |
2.5 |
3.8 |
|
Conveyer(L×W×H) |
M |
2.00×1.05×2.18 |
2.00×1.05×2.18 |
|
Conveyer weight |
T |
0.4 |
0.4 |
|
High pressure compressor
(L×W×H) |
M |
1.90×0.75×1.50 |
1.90×0.75×1.50×2sets |
|
Low pressure compressor
(L×W×H) |
M |
1.85×0.70×1.50 |
1.85×0.70×1.50 |
|
High pressure air receiving tank(D×H) |
M Mpa |
φ0.70×2.55 |
φ0.70×2.55 |
|
Air dryer(L×W×H) |
M |
0.85×0.50×0.95 |
0.85×0.50×0.95 |
|
Air filters |
kg |
10×2pcs |
10×2pcs |
|
Mould lifting rack |
kg |
15 |
15 |
|
SAFETY |
Auto-emergency alarm |
Locking device on each step |
|
|
|
|
|
| Shenzhen Hauangtat Industrial & Development Co., Ltd. |
|
|
